No sound in your HOVERAir videos after recording? This is usually not a device issue. HOVERAir does not record audio automatically. Before shooting, you need to enable audio recording in the Hover App or use Beacon’s built-in microphone.
This article explains:
- How to record audio with your smartphone or Beacon
- How to choose a noise reduction mode
- Where recorded audio is saved
- How to export Beacon audio files
Note: The first time you use Extreme Noise Reduction, an internet connection is required to download the noise reduction model.
Noise Reduction Modes:
| Mode | Best For | Not Recommended For | Special Notes | |
| Normal Noise Reduction | Everyday videos, travel, vlogs, and scenes where you want natural voices and ambient sounds. | Environments with strong background noise. | Reduces propeller noise while keeping surrounding sounds more natural. | |
| Extreme Noise Reduction | Noisy environments where you want clearer human voices. | Scenes where you want to keep natural ambient sounds. | Reduces more background noise to emphasize voices. An internet connection is required the first time you use this mode. |
Audio Recording with Your Smartphone
Audio is recorded through your smartphone's microphone while the flying camera is recording video. The audio track is not available as a separate file. When you download the recorded video, the audio will be automatically combined with the video.
This method is suitable for everyday shooting, vlogs, travel, and other scenarios where you want to capture voices and ambient sounds.
How to Enable Audio Recording
Pre-check
✅ Your HOVERAir and Hover App are updated to the latest firmware & app version.✅ The Phone or Beacon microphone is clean and free of sand, water, salt residue or debris.✅ For Extreme noise reduction: Prepare internet access for the initial model download.
- Connect your flying camera to the Hover App.
- Go to HOVER Settings → General Settings → Sound Recording Option.
- Turn on Video Sound Recording and select noise reduction mode:
- Normal noise reduction : Reduces propeller noise while preserving voices and ambient sounds.
- Extreme noise reduction: Further reduces propeller and background noise to emphasize human voices. An internet connection is required the first time you use this mode to download the noise reduction model.
- Start recording.
Important Notes
When recording audio through your smartphone, make sure the Hover App remains open and active throughout the entire recording.
Audio recording may be interrupted if you:
- Lock your phone screen
- Switch to another app
- Close or force quit the Hover App
Where is the audio recorded by my phone saved? Can I export it separately?
Audio recorded through your phone’s microphone is temporarily saved in the Hover App. You cannot find or export this audio file separately.
When you download a video from the album in the Hover App, the app automatically combines the audio with the video, so the downloaded video will include sound.
Note: Smartphone-recorded audio cannot be accessed directly as a standalone audio file from the app's private storage.
Audio Recording with Beacon
Audio Recording Icon
The microphone icon shows the current Beacon audio recording status:
| Status | Description | What Happens |
| Enabled | Audio recording is turned on. | The Beacon will record audio when you start shooting. You can turn this feature on or off in Settings. |
| Recording | The Beacon is currently capturing audio. | Downloaded videos will include the synced audio. |
| Transferring | Audio is being transferred to the flying camera after recording stops. | Please wait until the transfer is complete before turning off the device or disconnecting. |
Beacon’s built-in microphone is designed for hands-free audio recording during activities such as running, cycling, and hiking.
Choose the Right Audio Recording Method for Your Shooting Scenario
HOVERAir supports audio recording through either your smartphone microphone or Beacon’s built-in microphone. Choose the recording method based on your shooting environment and needs.
| Recording Method | Best For | Audio Storage / Export |
| Smartphone Microphone | Everyday shooting, vlogs, travel, and situations where you can keep your smartphone nearby. Suitable for capturing voices and ambient sounds naturally. | Audio is combined with the video when you download the video from the Hover App album. The audio is not available as a separate file. |
| Beacon Built-in Microphone | Hands-free scenarios such as running, cycling, hiking, and other activities where carrying or holding a smartphone is inconvenient. | Audio is combined with the video when downloading through the Hover App. Starting from Hover App version 2.3.6, Beacon-recorded audio can also be exported separately from the flying camera. |
How to Record Audio with Beacon
- Connect your flying camera to Beacon.
- Open the recording screen on Beacon.
- Swipe down to find Sound Recording Option.
- Adjust the audio settings.
- Start recording.
- After recording, download the video from the Hover App album.
The recorded audio will be automatically combined with the video.
Starting with version 2.3.6, Beacon-recorded audio can be exported separately.
After recording, the audio is saved to the device's internal storage. To copy the audio files to your computer:
- Connect the device to your computer with a USB cable.
- Make sure the USB connection mode is set to "File Transfer" (MTP) — not "Charging only".
- Open the "Hover X1-AUDIO" folder on your computer, then open the "Audio" folder inside it. Your recorded audio files are there.
💡 If your computer does not recognize the device or you cannot see the "Hover X1-AUDIO" folder, please check two things: first, the USB connection mode is set to File Transfer (MTP); second, the USB cable supports data transfer — some cables are for charging only. If you are unsure, please try the original cable that came with your device.
Frequently Asked Questions
Frequently Asked Questions
1. What should I do if the video and audio are out of sync?
We recommend downloading the video directly from the Hover App's album.
The app automatically combines the recorded audio with the video during the download process.
2.Why is the audio recording unstable or only available for part of the video?
If you are recording audio through your smartphone, make sure the Hover App remains open and active throughout the entire recording.
Do not lock your phone screen, switch to another app, or close the Hover App, as these actions may interrupt audio recording.
3.Why can't I enable Extreme noise reduction?
Extreme noise reduction requires an internet connection the first time it is used to download the noise reduction model.
Make sure your phone is connected to the internet, then try enabling the feature again.
4.Why is there no sound even though all audio settings are enabled?
Your phone may not have granted the Hover App microphone permission. Please enable microphone access in your phone's Settings and try recording again.
5.I turned on audio recording, but my video has no sound. What should I do?
Please check the following:
- Make sure you are using the latest version of the Hover App.
- Check that microphone permissions are enabled.
- Download the video from the Hover App album to ensure the recorded audio is properly combined with the video.
6.Why does my Beacon audio have wind noise or a whistling sound?
Strong wind may affect audio quality. To improve recording results:
- Use the official wind protection accessory if available.
- Avoid exposing the microphone directly to strong wind.
- Use noise reduction during video editing if needed.
7.Can I edit or trim the audio from a long video?
You can edit your video using the video editing tools in the Hover App or other video editing software. Please refer to the official video editing guide for detailed instructions.
8.Can I export audio recorded by my smartphone separately?
No. Audio recorded through your smartphone microphone cannot be exported as a separate audio file. When you download the video from the Hover App album, the audio is automatically combined with the video.
9.Can I export audio recorded by Beacon separately?
Yes. Starting from Hover App version 2.3.6, Beacon-recorded audio can be exported separately.
Audio Recording When Using Beacon
| Item | Audio Recording with Beacon |
| Audio recording device | Built-in Beacon microphone |
| Beacon's role | Remote control and audio recorder |
| Recommended scenarios | Running, cycling, hiking, and other outdoor activities |
| App required | Yes |
| Standalone audio export | Supported from v2.3.6 |
| Audio storage for standalone export | flying camera internal storage → Hover X1-AUDIO/Audio |
Important: Beacon records audio through its built-in microphone during flight.
For everyday shooting, vlogs, and travel, you can also use your smartphone directly to control the flying camera and record audio.
Comments
0 comments
Please sign in to leave a comment.