How do replace the propeller on v-coptr?
Request for technical support.
The first flight after I update software on my v-coptr, when the drone is lifted up 1.5 miter in the air, it suppose to hover but start to fly reverse (backward), not matter how I try to control it, included hit on the 'stop' button on the remote control but it was still unstoppable and hit against a wall, ends up I got to hold it by force and removed the battery. Unfortunately the propellers are broken.
I decided to replace the propellers, after getting my spare parts from the original box, I found that all the spare screws are rusted. And the screws on the drone (attached the propellers) cannot be unscrew, no matter how hard i tried. I guest it can be rusted 'inside', both screws and screw drive are now loosed too.
Please help what can I do next?
I decided to replace the propellers, after getting my spare parts from the original box, I found that all the spare screws are rusted. And the screws on the drone (attached the propellers) cannot be unscrew, no matter how hard i tried. I guest it can be rusted 'inside', both screws and screw drive are now loosed too.
Please help what can I do next?
0
-
ㅣ
That's right. Falcons have a habit of suddenly approaching backwards. There was one speck in the lower vision sense, maybe it was because of this. I think Zero Zero should find out the cause.right. The screw does not loosen well. crushed Line it with a hacksaw and 1 with a screwdriver
Web results
0
Please sign in to leave a comment.
Comments
1 comment